Description
eSUN ePLA-ST High Strength Filament 1.75mm 1kg – Various Colors
ePLA-ST has the characteristics of high impact resistance, high elongation at break, high bonding strength and high printing accuracy. There is no need to heat the bed or print in a closed chamber, and no warping when print large models.
Comparison of physical performance indicators：
|
PLA |
PLA+ |
ePLA-ST |
|
|
Appearance |
White |
White |
White |
|
Tensile Strength |
78 Mpa |
63 Mpa |
34.3 Mpa |
|
Elongation at break |
14% |
20% |
90% |
|
Bending strength |
90 Mpa |
74 Mpa |
43 Mpa |
|
Flexural modulus |
1984 Mpa |
1934 Mpa |
1477 Mpa |
|
Notch impact |
5.6 |
9 |
63 |
Recommended Printing Parameters：
|
Material name |
ePLA-ST |
|
Extruder Temperature |
200-230°C |
|
Bed Temperature |
45 – 60°C |
|
Fan |
100% |
|
Printing speed |
40-100mm/s |
| Heated Bed |
Optional |
| Recommended Build Surfaces |
Masking paper, PVP solid glue, PEI |
Print performance comparison：
|
PLA |
PLA+ |
ePLA-ST |
Conclusion |
|
|
Surface finish |
Normal |
No obvious layering |
No obvious layering |
ePLA-ST≈PLA+>PLA |
|
Hole column fitting model (The smaller the value, the better) |
0.3mm |
0.3mm |
0.3mm |
ePLA-ST=PLA+=PLA |
|
Hanging model (The larger the value, the better) |
<45° |
<60° |
<70° |
ePLA-ST>PLA+>PLA |
|
Suspension bridge (The larger the value, the better) |
40mm |
50mm |
50mm |
ePLA-ST=PLA+>PLA |
Note: Printing test conditions: nozzle 215℃; bed 45℃; speed 40mm/s
For more information on this product, see here
