Description
Cyclops+ Dual Extrusion 12 volts , Air Cooled
Still dual extrusion in a tiny package; now with new compatibility and features.
This beasts has evolved. classic airand experience the multi-extrusion Cyclops+. Read more on e3d blog!
-
Multi-Extrusion
Choose the Chimera+ for two-filament, two-nozzle dual extrusion, great for multi-material supports. Or try the unique two-filament, one-nozzle Cyclops+. With a hot side designed to switch seamlessly between inputs, Cyclops+ never leaves an idle nozzle.
-
Ecosystem Compatibility
Cyclops+ and Chimera+ fit our standard fans, thermistors and heater cartridges.
Cyclops+ now compatible with cartridge-style heaters and thermistors, opening the door to PT100s and thermocouples.
-
Unique Cyclops Hotside
The Cyclops heater block has been completely reworked, improving performance and making it more adaptable. We’ve removed all unnecessary material, lowering the thermal mass and reducing heat-up times. By changing the outer architecture of the block, we’ve also reduced the amount of heat radiating down from the block onto the print. This makes it easier to print small, complex parts without the need for a silicone sock.
The distance between the filament paths is 2mm larger compared to the old-style Cyclops. This makes Cyclops+ compatible with the Kraken, for those looking to experiment.
Air-Cooled Cold Side ( Cyclops+)
- Air-cooled heatsink
- 2x black plastic collets
- 2x blue plastic collet clips
- Cyclops+ fixings kit (suitable for Cyclops+ and Chimera+)
- 800mm PTFE bowden tubing
- 12V/24V fan
Cyclops+ Hot Side
- 0.4mm Cyclops nozzle
- Cyclops heater block
- 2x Kraken heatbreaks
- Cyclops+ hotside fixings kit
- Heatsink Compound
- 30W Heater cartridge (12V/24V)
- Thermistor cartridge
